Aluminum 5083 1030 3003 6061 6063 Extrusion Part Sanodize
d PV Bracket Accessories
1,Description:
For the preheating of the mold, it is recommended to use a heating
furnace (furnace).If the heating furnace is too small, the molds
are too close to each other, the air is not easy to circulate the
flow, at present there is a kind of box heating furnace (box
furnace) can make each set of molds are heated separately, the
effect is good.
The proper temperature of the ingot depends on the number of tons
of agent machine, alloy type, the shape of the agent, the
temperature of the die and extrusion speed and so on.Lower
temperature ingots have more room to heat up in the dosage process
and can also be extruded at higher speeds.
The extrusion temperature of the profile is also closely watched by
the advanced dosage manufacturer, this temperature is controlled by
the speed of the pusher and the degree of friction of the die, the
general extrusion process will be increased by about 38 ℃, and most
of this increase is dependent on the design of the die, the design
should be aimed at obtaining a greater productivity, so that it is
possible to maintain the required dimensional accuracy of the
public opinion of the surface finish of the case, and to achieve a
high rate of production.
2,Applications:
1. Extrusion variability technology: By changing the position of
die components and cavities in the extrusion process, the width and
thickness of the output can be varied as desired. 2.
2. Manufacture of large width extruded profiles: 1. Expansion plate
technology; 2. Use of angular ingot cylinders to change the shape
of the ingot in conjunction with a large cross-section.
3. finite element analysis (finite element analysis) of the recent
applications: the use of simple algebraic formulas on the computer
to find the aluminum extrusion process of stress-strain; will be
divided into very small units of the composition of the units are
connected to the so-called nodes (nodes), when the nodes of the
force on the entire structure of the changes in the opinion of the
impact, that is, the type of FEA to be carried out by the focus.
3,Specifications:
| Product | Aluminium Extrusion Parts |
| Material | AL2024, AL5052, AL6061, AL6063, AL7050, and AL7075 |
| Color | Green, Grey, Black, White, (RAL series)etc. |
| Surface treatment | Mill finish, anodized, electrophoretic coating, powder coating,
thermal break, wood grain/wood-in-shift, etc. |
| Lead Time | 1-2 weeks for sample,2-5 weeks for bulk order |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
4,Feature Advantage:
The versatility of aluminum extrusions supports the fast-paced
innovation inherent in the electronics industry. It is suitable for
cost-effective solutions with consistent quality parts prototyping
and mass production.
Examples of aluminum extrusion applications in the electronics
industry:
CPU and GPU heat sinks
Electronic equipment housing
LED panel frame
Server and network equipment rack
Power supply housing
Electronic instrument case
Cooling body for high power electronic devices
Rails for mounting electronic components
Robot structural component
Borders for monitors and displays
5,About us
